The page that opens when you choose a plant. At the top are the plant name, its status and the tabs Overview, Analytics, Alerts, Device and Settings. This page describes the Overview tab.
Live system status
The panel shows four blocks joined by animated lines:
- Production: the power coming from the panels
- Grid: the power exchanged with the grid, with a label saying whether you are importing or exporting
- Loads: the power consumed by the building
- Storage: the battery power, with the state of charge and whether it is charging or discharging
The animated lines show where the energy is going at that moment. At the top left, Connected confirms that the plant is sending data.
Following the plant live
The LIVE button makes the device readings arrive as they happen, for a few minutes. On zeroCO2 XL plants the live reading starts by itself when you open the page.
The detail of a block
Clicking a block opens its detail, with tabs for storage, grid, loads and production. For every block you see the resources it is made of, each with its status, and a table with the main quantities: for the battery, state of charge, power, voltage, current and the maximum and minimum temperatures and voltages of the modules.
The plant diagram (zeroCO2 XL)
On zeroCO2 XL plants, next to LIVE there is the Diagram button. It opens the plant diagram: grid and meter, PV strings and inverters, main switchboard, loads and battery, each with the power flowing through it. At the top of the diagram are the totals for grid, production, loads and storage. Zoom and pan with the controls at the bottom right.
The rest of the page
Below and on the right you find the chart of the day and the energy balance: they are described on the page "Charts, periods and export".
Several plants
If you have several plants, the Overview in the side bar lists them all, with the status of each and the energy totals. From a plant page you can switch to another from the menu next to the name.